T23C Foldable Aluminium Roof Top Tent

Features:

  • Folding: for pickup and small car
  • Slim: 14.5cm profile
  • 2x T-slot, for more options
  • Customized shell color (MOQ=1pc)
  • Optional Roof Racks with graved Logo

 

The smallest folded footprint we make

The T23C folds to 110 cm of width when closed — narrower than any other hard shell in the range. On a small hatchback or a compact SUV, that is the difference between a tent that sits inside the roof line and one that overhangs the windscreen.

It is also the lightest: from 41 kg on the 130 shell, 46 kg on the 150. Two people can lift it onto a roof rack without a hoist, which matters for the dealer fitting it in the yard and for the end user who takes it off between trips.

14.5 cm closed height

Ultra-slim by any standard. Combined with the narrow footprint, the closed package is about as unobtrusive as a hard-shell tent gets — low enough for car park barriers and narrow enough that it does not dominate the vehicle in a photograph.

Two rainfly styles

The T23C ships with either of two rainfly configurations, A or B. They differ in how the fly extends over the door and window openings; the choice usually comes down to whether the customer prioritises ventilation or weather protection on the entry side. Specify which one you want at order stage — both fit the same shell.

Two side slots

Two slots on a shell this slim is generous. An awning and an annex both mount without adding a bracket that would push the closed width out past the 110 cm figure.

Sizing

The T23C-130 sleeps one to two at 41 kg, closing to 130×110×14.5 cm and opening to 130×201×108 cm. The T23C-150 sleeps two to three at 46 kg, closing to 150×110×14.5 cm and opening to 150×201×108 cm.

Specification

T23C Specification

Roof Top Tent T23C-130 T23C-150 T23C-170 T23C-200
Open and Close Time 10 Seconds 10 Seconds 10 Seconds 10 Seconds
Roof Material Aluminium Board Aluminium Board Aluminium Board Aluminium Board
Roof Color Black (defaulted), White Customized color Black (defaulted), White Customized color Black (defaulted), White Customized color Black (defaulted), White Customized color
Fabric Material Waterproof rip-stop fabric with coating Waterproof rip-stop fabric with coating Waterproof rip-stop fabric with coating Waterproof rip-stop fabric with coating
Fabric Color Sand / Grey / Customized Color Sand / Grey / Customized Color Sand / Grey / Customized Color Sand / Grey / Customized Color
Mattress 1.5cm 1.5cm 1.5cm 1.5cm
Floor Aluminum (2-layer) Aluminum (2-layer) Aluminum (2-layer) Aluminum (2-layer)
Closed Dimension (WxLxH) 130*110*14.5cm 150*110*14.5cm 170*125*14.5cm 200*125*14.5cm
Open Dimension (WxLxH) 130*201*108cm 150*201*108cm 170*200*130cm 200*200*130cm

Video

Related products

FAQ

What is the difference between hard shell, soft shell and inflatable tents?
Hard shell tents have a rigid ABS or aluminium lid that opens on gas struts or an electric actuator, and they are the quickest to set up. Soft shell tents fold out from a fabric cover and give more floor area for the same footprint. Inflatable tents use air tubes instead of poles, which keeps the packed size and weight down. Which one suits you depends on how often you camp and how much space you need.
Will it fit my roof rack?
A rooftop tent needs a rack whose static rating covers the tent plus everyone sleeping in it, with a margin for bedding and gear. Check the static rating of your rack and the roof limit set by your vehicle manufacturer before ordering; if you tell us the rack model we will confirm the combination.
How long does it take to set up?
Hard shell models open on gas struts or an electric actuator and are ready in well under a minute; soft shell models are unfolded by hand and take a few minutes to tension. Neither requires tools.
Does it come with a ladder?
Standard models ship with a telescopic ladder. Confirm the ladder length you need when ordering if your vehicle is lifted, and we will match it to your roof height.
Can I add an annex room or lighting?
Yes. We supply the AR01 annex room and the LS01 LED light strip as matching accessories, both designed for our roof top tent range.
Can I carry gear on top of the tent?
On hard shell models a roof load carrier can be specified as an option - state it when ordering and we will confirm what the shell is built to take. On soft shell models the folded fabric is not a load surface.
Is the tent waterproof, and what does the IP67 rating mean?
IP67 means dust-tight and protected against temporary immersion. Several of our ABS hard shell models are quoted at IP67, and that figure comes from our own in-house test rather than a third-party laboratory, so we do not quote a certificate number. Soft shell and inflatable models are water-repellent rather than rated, and we recommend a rain fly for sustained heavy rain. Tell us the conditions you expect and we will confirm what the model you are considering is built to handle.
MOQ
MOQ depends on the model - as a guide, allow 10 to 50 units per model for OEM production. A stock sample can be supplied as a single unit, and mixed models can share one container to reach an efficient volume. Tell us your target quantity and we will confirm.
Warranty
12 months against manufacturing defects, covering welds, dimensions and coating adhesion. It does not cover collision damage, incorrect installation, overloading or normal wear. Claims are handled with photos and resolved by replacement part or credit.
Branded Packing
Generally, we pack our products in neutral brown cartons. If you have a legally registered patent, we can pack them in your branded boxes after getting your authorization letters.
Payment Terms
Payment terms depend on the order value and how much customization is involved. Standard is T/T 50% deposit with 50% before delivery; larger or customized orders can be arranged at 30% deposit with 70% before delivery. We will show you the photos of the products and packages before you pay the balance - please contact us to confirm the terms for your order.
Delivery Time
Generally, it will take 2-3 weeks after receiving your advance payment. The specific delivery time depends on the items and order quantity.
OEM/ODM
Yes, we have an engineer team. It is ok to produce according to your samples or technical drawings. We can build the molds as required.
Sample Policy
We can supply the sample if we have ready parts in stock. Sample and courier cost can be paid by Western Union, Bank Transfer, etc.
Long-term Cooperation
1. Win-win: We keep good quality and competitive price to ensure our customers benefit; 2. Friendship: We respect every customer and build long-term business relationships.