T25A Aluminium Rooftop Tent

Features:

  • Two-side folding
  • Aluminum shell

The roomiest tent in the range

If a customer’s complaint is that roof tents feel cramped, this is the answer. The T25A is a Z-fold shell that opens to 140 cm of headroom — enough to stand crouched, change clothes standing up, and move around at night without climbing over another person.

That figure is not a small increment over the 102–108 cm of the flat-roof models. It changes how the tent is used: a 140 cm interior is a room you can spend a rainy afternoon in, not a place you lie down and wait out the weather.

Z-shape fold, large doors and windows

The Z-fold raises a two-panel roof into a peak rather than lifting a single lid. Combined with the large door and window openings on all sides, the interior stays bright and cross-ventilated — the practical answer to condensation in cold, wet climates, where a sealed box with one vent will always mist up overnight.

Where it sits in the range

The T25A is the space flagship, not the volume model. It is heavier and more expensive than the T21 series, and it suits buyers who use the tent as accommodation rather than as a weekend accessory: touring couples, rental fleets, overlanders doing multi-week trips.

How to sell it

Show it next to a T21A. The difference is not visible on a spec sheet — both are aluminium shells that open in seconds — but it is obvious the moment someone sits inside. That comparison is the whole sales argument, and it is why we keep both models in the range rather than pushing everyone to the cheaper one.

Specification

T25A Specification

Roof Top Tent T25A
Open and Close Time 10 Seconds
Roof Material Aluminium Board
Roof Color Black(default), White, Customized Color
Fabric Material Waterproof Rip-stop fabric
Fabric Color Sand / Grey / Customized Color
Mattress 3cm / 5cm
Floor Aluminum (2-layer)
Dimension Close (WxLxH) 130x200x18.5cm
Dimension Open (WxLxH) 130x200x118cm

Video

Related products

FAQ

What is the difference between hard shell, soft shell and inflatable tents?
Hard shell tents have a rigid ABS or aluminium lid that opens on gas struts or an electric actuator, and they are the quickest to set up. Soft shell tents fold out from a fabric cover and give more floor area for the same footprint. Inflatable tents use air tubes instead of poles, which keeps the packed size and weight down. Which one suits you depends on how often you camp and how much space you need.
Will it fit my roof rack?
A rooftop tent needs a rack whose static rating covers the tent plus everyone sleeping in it, with a margin for bedding and gear. Check the static rating of your rack and the roof limit set by your vehicle manufacturer before ordering; if you tell us the rack model we will confirm the combination.
How long does it take to set up?
Hard shell models open on gas struts or an electric actuator and are ready in well under a minute; soft shell models are unfolded by hand and take a few minutes to tension. Neither requires tools.
Does it come with a ladder?
Standard models ship with a telescopic ladder. Confirm the ladder length you need when ordering if your vehicle is lifted, and we will match it to your roof height.
Can I add an annex room or lighting?
Yes. We supply the AR01 annex room and the LS01 LED light strip as matching accessories, both designed for our roof top tent range.
Can I carry gear on top of the tent?
On hard shell models a roof load carrier can be specified as an option - state it when ordering and we will confirm what the shell is built to take. On soft shell models the folded fabric is not a load surface.
Is the tent waterproof, and what does the IP67 rating mean?
IP67 means dust-tight and protected against temporary immersion. Several of our ABS hard shell models are quoted at IP67, and that figure comes from our own in-house test rather than a third-party laboratory, so we do not quote a certificate number. Soft shell and inflatable models are water-repellent rather than rated, and we recommend a rain fly for sustained heavy rain. Tell us the conditions you expect and we will confirm what the model you are considering is built to handle.
MOQ
MOQ depends on the model - as a guide, allow 10 to 50 units per model for OEM production. A stock sample can be supplied as a single unit, and mixed models can share one container to reach an efficient volume. Tell us your target quantity and we will confirm.
Warranty
12 months against manufacturing defects, covering welds, dimensions and coating adhesion. It does not cover collision damage, incorrect installation, overloading or normal wear. Claims are handled with photos and resolved by replacement part or credit.
Branded Packing
Generally, we pack our products in neutral brown cartons. If you have a legally registered patent, we can pack them in your branded boxes after getting your authorization letters.
Payment Terms
Payment terms depend on the order value and how much customization is involved. Standard is T/T 50% deposit with 50% before delivery; larger or customized orders can be arranged at 30% deposit with 70% before delivery. We will show you the photos of the products and packages before you pay the balance - please contact us to confirm the terms for your order.
Delivery Time
Generally, it will take 2-3 weeks after receiving your advance payment. The specific delivery time depends on the items and order quantity.
OEM/ODM
Yes, we have an engineer team. It is ok to produce according to your samples or technical drawings. We can build the molds as required.
Sample Policy
We can supply the sample if we have ready parts in stock. Sample and courier cost can be paid by Western Union, Bank Transfer, etc.
Long-term Cooperation
1. Win-win: We keep good quality and competitive price to ensure our customers benefit; 2. Friendship: We respect every customer and build long-term business relationships.