What’s in the carton?
1 Unit x Rooftop Tent
1 pc x Mattress
Some x Awing Poles (Qty is different between different tent models)
1 pc x Telescopic Ladder(230cm)
Mounting Tools( Details as follow):
4x Splints
8x Bolts
8x Hexagonal Nut
8x Pentagon Nut
8x Round Cap
1x Anti-thief Wrench
Installing Your Tent
Step 1:
Take out the bolts from the Mounting Tool Bags, and remove the nuts from the bolts.
Step 2:
Slide the bolts into the rails at the bottom of the tent. Total are 8 bolts
Step 3:
Load the tent onto the roof racks of the car’s roof.
* Keep the racks between each pair of bolts and the slim side is in front of the car.
Step 4:
Add the Splints into the bolts and then slide the round cap into the bolt in the order shown in the figure.
Step 5:
1) Fasten the pentagon screw by the anti-thief wrench’s pentagon side.
2) Fasten the hexagonal screw by the anti-thief wrench’s hexagonal side.
*Anti-thief wrench is not in each tent. If you need it, please contact the seller.
Step 6:
Re-check the installation bolts and nuts after installation.
*Be sure that they are tight before driving.